To displace the two prong electric receptacle socket, turn the power off for this circuit in the circuit breaker panel. Work with a voltage tester to verify that the ability is down and check that is double each step of the process through the entire procedure.
You need to just take the receptacle apart by eliminating the wall dish first. Unscrew the middle screw (Or upper and screws that are lower counter-clockwise. Pry away the wall dish through the receptacle. The wall surface dish might be held on the wall surface and/or the receptacle by many people coats of paint. Make use of razor knife to get across the exterior sides for the wall dish. Additionally score over the external face associated with the receptacle. In the event that wall surface plate will not loosen through the knife, take to getting a little flat putty blade behind it. In some cases you could simply have to break off the beaten track dish, however the face associated with receptacle can come down also. Repeat this aided by the charged energy down.
Some newer design wall surface dishes have actually the screws concealed. You need to pry away the leading for the wall surface dish using a little screwdriver that is flat. Pry carefully and evenly from all corners.